Mitsubishi Electric LT-46244 Owner's Manual page 67

Appendix C: TV Guide Daily, continued
TV Guide Daily Troubleshooting Tips
Symptom
1. When I enter the Guide I see a Setup Prog-
ress screen.
2. Listing reads "Listings Pending."
3. Tiles in Listing read "No Listing" or "Title
Unavailable."
4. Tiles in Listing read "Turned Off."
5. There are repeated or missing time slots in
the Listings.
6. My channel lineup is incorrect or I see a
channel lineup screen when I enter the
Guide.
7. I receive a channel on two different broad-
cast services, but only one is available in
the Guide Listings.
8. My TV is tuned to a different channel than
the one I was watching the last time the TV
was turned off.
Remarks
You have not yet received all of the program listings (it may take
up to 24 hours to receive a full grid of listings).
The Guide has not yet completed initial setup, completed
changes you made, or the Guide is setup incorrectly. Verify
that your TV is properly connected to the input source. Then,
verify that the ZIP code and input source (entered during initial
setup of Guide) are correct. See chapter 5, "TV Menu Set-
tings," and "Inputs Menu" for more information.
The Guide has not received updated show information or no
information was available the last time the Guide received an
update, update did not occur, or there was a power failure.
Make sure you turn the TV off when not in use to allow for
updates. In the case of a power failure, it may take up to 24
hours to update listings.
The channel you were watching before entering the Guide
is turned OFF in the grid. Use the channel editor to change
the channel setting to ON (see previous page, "Modify Guide
Setup").
The Guide is close to the time that a Daylight Savings time
adjustment is needed. The Guide automatically adjusts
accordingly when the local time is 2:00 a.m. to account for the
affected hour of programming. Once the adjustment is made,
the Listings should return to normal within 24 hours.
An incorrect lineup for your area is selected in the Guide setup.
Select the correct channel lineup for your area (see previous
page, "Modify Guide Setup").
The Guide is not setup correctly. See previous page, "Modify
Guide Setup."
The Guide changes the channel to receive updates and does
not change the channel back until the update is complete. If
the TV is turned on before the update is complete, the channel
will not change back automatically.
Appendices
67