Sony DCR-PC350 Service Manual page 86

• Adjusting items when replacing a board or EEPROM
When replacing a board or EFPROM, adjust the items indicated by z in the following table.
Adjustment Adjustment
Section
Initialization of Loading of flash memory program
8, A, B, C, D, E, F, Initialization of A, B, D, 1A,1B page data
14, 18, 19, 1A, 1B, 1C, Initialization of 8, C, 18, 1C page data
1E, 1F page data Initialization of E, F, 14, 19, 1E, 1F page data
54MHz/67.5MHz origin oscillation adjustment
HALL adj.
MR adj.
CCD Output 2ch Matching adj.
Flange back adj.
Mixed color compensation adj.
ND ON/OFF adj.
AWB standard data input
Camera
LV standard data input
Auto white balance adj.
Color reproduction adj.
MAX GAIN adj.
Mechanical shutter adj.
Steady shot check
Strobe light level adj.
Strobe white balance adj.
EVF automatic adj.
Color EVF
White balance adj.
LCD automatic adj.
V COM adj.
LCD
Transmissive mode white balance adj.
Reflective mode white balance adj.
Mechanism Tape path adj.
Touch panel adj.
System control
Serial No. input
CAP FG duty adj.
Servo, RF Switching position adj.
Error rate check
S VIDEO OUT Y level adj.
Video
S VIDEO OUT chroma level adj.
DCR-PC350/PC350E
replacement replacement
z
z
z
z
z
z
z
z
z
Table. 6-1-1(2).
6-3
Note2: When the repair is finished,
Board EEPROM
z z
z z
z z
z z
z z z
z z z
z z z
z z z
z z z
z z z
z z z
z z z
z z z
z z z
z z z
z z z
z z z z
z z z
z z z
z z z
z z z
z z z z
z z z
z z z
z z z z
z z
z z
z z z
z z z
z z z
z z
z z
confirm the following items.
1. Shoot the all black subject (Attach
the lens cap and shoot), and confirm
that a vertical line is not displayed
in the center of the screen, and that
there is no difference in left-right
brightness level of the screen.
2. Shoot a subject of low light, and
confirm that a vertical line is not
displayed in the center of the screen,
and that there is no difference in left-
right brightness level of the screen.
3. Shoot a subject of normal light, and
confirm that a vertical line is not
displayed in the center of the screen,
and that there is no difference in left-
right brightness level of the screen.
When the above symptom
occurs, perform the whole process
of "CCD Output 2ch Matching
Adjustment".