Resuming The Programme When The Programme Status Is Rinse Hold; Unloading The Laundry; Switching Off The Appli- Ance; Childproof Lock - Siemens WM16XKH2EU User Manual And Installation Instructions

Table of Contents

Advertisement

– If the water level is high, start
the
⁠   Spin programme or select
a suitable programme for drain-
ing.
→ "Programmes", Page 26
Remove the laundry → Page 33.
3.
13.10 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Start the
⁠   Spin programme or se-
1.
lect a suitable programme for
draining.
→ "Programmes", Page 26
Press Start/Reload 
2.
13.11 Unloading the laundry
Open the appliance door.
1.
Remove the laundry.
2.
13.12 Switching off the appli-
ance
Press
.
1.
Wipe the rubber gasket dry and re-
2.
move any foreign objects.
Leave the appliance door and de-
3.
tergent drawer open so that resid-
ual water can evaporate.
.
14 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold the two
buttons for approx. 3 seconds.
a The display shows
a The controls are locked.
a The childproof lock remains active
even after the appliance has been
switched off.
14.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
Press and hold the two
buttons for approx. 3 seconds.
So that the programme currently
running is not cancelled, the pro-
gramme selector must be set to
the initial programme.
goes out in the display.
a
Childproof lock en
⁠   3 sec.
.
⁠   3 sec.
33

Advertisement

Table of Contents
loading

Table of Contents