Resuming The Programme When The Programme Status Is Rinse Hold; Unloading The Laundry; Switching Off The Appli- Ance; Childproof Lock - Siemens WM14N21BDN User Manual And Installation Instructions

Table of Contents

Advertisement

13.13 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
Rinse Stop is activated.
¡
→ "Buttons", Page 22
The last rinse cycle of the set pro-
¡
gramme has ended and the laun-
dry is in the rinsing water.
Set the Centrifugering (Spin)
1.
programme or a programme for
draining the water.
→ "Programmes", Page 23
Press
.
2.
13.14 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.15 Switching off the appli-
ance
Turn the programme selector to
1.
(Off) .
Fra
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Leave the appliance door and de-
4.
tergent drawer open so that resid-
ual water can evaporate.
14 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold the two
buttons for approx. 3 seconds.
The display shows
a
The control elements are locked.
a
The childproof lock remains active
a
even after the appliance has been
switched off and in the event of a
power cut.
14.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
Press and hold the two
buttons for approx. 3 seconds.
goes out in the display.
a
Childproof lock en
⁠   3 sek.
.
⁠   3 sek.
31

Advertisement

Table of Contents
loading

Table of Contents