Resuming The Programme When The Programme Status Is Rinse Hold; Unloading The Laundry; Switching Off The Appli- Ance; Childproof Lock - Siemens WM14N2Z9HK User Manual And Installation Instructions

– If the water level is high, start
the ⁠ Spin programme or se-
lect a suitable programme for
draining.
→ "Programmes", Page 23
Remove the laundry.
3.
→ "Unloading the laundry",
Page 31
13.13 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
Rinse Stop is activated.
¡
→ "Buttons", Page 22
The last rinse cycle of the set pro-
¡
gramme has ended and the laun-
dry is in the rinsing water.
Set the ⁠ Spin programme or a
1.
programme for draining the water.
→ "Programmes", Page 23
Press ⁠ Start / Reload.
2.
13.14 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.15 Switching off the appli-
ance
Turn the programme selector to
1.
Off .
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Leave the appliance door and de-
4.
tergent drawer open so that resid-
ual water can evaporate.

Childproof lock

14 Childproof lock
Secure your appliance against being
Childproof lock
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold the two
▶
buttons for approx. 3 seconds.
The display shows
a
The control elements are locked.
a
The childproof lock remains active
a
even after the appliance has been
switched off and in the event of a
power cut.
14.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
Press and hold the two
▶
buttons for approx. 3 seconds.
Childproof lock en
⁠ 3 sec.
.
⁠ 3 sec.
31