Siemens SIMATIC NET SCALANCE XCH-300 Product Manual page 102

Certifications and approvals
EAC (Eurasian Conformity)
Eurasian Economic Union of Russia, Belarus, Armenia, Kazakhstan and Kyrgyzstan
Declaration of conformity according to the technical regulations of the customs union (TR ZU)
FDA and IEC marking
The following devices meet the FDA and IEC requirements listed below:
Device
SCALANCE XCM332
SCALANCE XCM323
SCALANCE XCM324
SCALANCE XCH328
SCALANCE XCM328
* In modular devices, you can find the marking on the plug-in transceiver used or in the relevant operating
instructions.
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Installation guidelines
The devices meet the requirements if you adhere to the installation and safety instructions
contained in this documentation and in the following documentation when installing and
operating the devices.
• "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual
support.industry.siemens.com/cs/ww/en/view/27069465)
• "Industrial Ethernet / PROFINET - Passive Network Components" System Manual
support.industry.siemens.com/cs/ww/en/view/84922825)
• "EMC Installation Guidelines" configuration manual
support.industry.siemens.com/cs/ww/en/view/60612658)
Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their target
systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
102
CAUTION
WARNING
CLASS 1 LASER Product
-
(*)
(*)
(*)
(*)
(https://
(https://
SCALANCE XCH-300/XCM-300
Equipment Manual, 10/2022, C79000-G8976-C585-02
(https://