5-20 PELTIER POWER CONTROL
Controls the power supply voltage for the peltier device (5V/6V). The return values are 1
with normal completion, and other than 1 with an error. The peltier power voltage status
may be obtained as the return value for the function.
Function name
WORD SetPeltierPower(ID, PeltierPower);
WORD GetPeltierPower (ID);
Format
WORD SetPeltierPower (WORD, WORD);
WORD GetPeltierPower (WORD);
Arguments
ID
PeltierPower
Return code
For peltier power control
Same as for CheckSensor function
Status acquisition
USB ID number
Specify MCD controller USB ID number
Set peltier power (5 V/6 V)
5 V
0
6 V
1
0
5 V
1
6 V
HAMAMATSU PHOTONICS K.K.
C7557-01 DLL INSTRUCTION MANUAL
25