5-4
MCD SELECTION
When multiple MCD controllers exist it becomes necessary to select which is to be
controlled. Running this function displays a selection dialog box from which the desired
controller is selected. When a controller is selected the status information is returned in the
argument. The selected controller ID is returned with normal completion, and 0xffff(-1) is
returned in the case of an error.
Function name
WORD SelectSensorUnit(Status);
Format
WORD SelectSensorUnit(SENSOR_STATUS*);
Arguments
Status
Return code
0 ~ 7
0xffff(-1)
MCD controller status information.
Specify the pointer for the SENSOR_STATUS structure.
Structure the same as for the CheckSesnor function.
Normal completion (ID number for selected controller)
No MCD controller connected
HAMAMATSU PHOTONICS K.K.
C7557-01 DLL INSTRUCTION MANUAL
9