A/D Converter Control - Hamamatsu Photonics C7557-01 Instruction Manual

5-6

A/D CONVERTER CONTROL

Set the A/D converters in the MCD controller. The return values are 1 with normal
completion, and other than 1 with an error. The A/D converter status may be obtained as
the return value for the function.
 Function name
WORD SetADType(ID, ADType);
WORD GetADType(ID);
 Format
WORD SetADType (WORD, WORD);
WORD GetADType (WORD);
 Arguments
ID
ADType
 Return code
For A/D converter control
Same as for CheckSensor function
Status acquisition
Note •
When SetADType function is executed, PixelClock return default.
USB ID number
Specify MCD controller USB ID number
Set A/Dconverter （ 12 bit(1 MHz) / 16 bit(250 kHz) ）
12 bit 0
16 bit 1
0 12 bit
1 16 bit
HAMAMATSU PHOTONICS K.K.
C7557-01 DLL INSTRUCTION MANUAL
11