Delay Time Of External Start Control - Hamamatsu Photonics C7557-01 Instruction Manual

5-8

DELAY TIME OF EXTERNAL START CONTROL

When set the external start mode, controls the delay time between TRIG IN inputs and
sensor scan starts. The return values are 1 with normal completion, and other than 1 with
an error. The delay time status may be obtained as the return value for the function.
 Function name
WORD SetDelayTime (ID, DelayTime);
WORD GetDelayTime (ID);
 Format
WORD SetDelayTime (WORD, WORD);
WORD GetDelayTime (WORD);
 Arguments
ID
DelayTime
 Return code
For delay time control
Same as for CheckSensor function
Status acquisition
USB ID number
Specify MCD controller USB ID number
Set delay time ( external start mode )
Range ： 0 ～ 65535 ms
Status returned within 0 ～ 65535 ms range
HAMAMATSU PHOTONICS K.K.
C7557-01 DLL INSTRUCTION MANUAL
13