Trigger Mode Control - Hamamatsu Photonics C7557-01 Instruction Manual

C7557-01 DLL INSTRUCTION MANUAL
5-7

TRIGGER MODE CONTROL

Set the trigger mode(internal trigger, external trigger, external start) in the MCD controller.
The return values are 1 with normal completion, and other than 1 with an error. The trigger
mode status may be obtained as the return value for the function.
 Function name
WORD SetTriggerMode (ID, TriggerMode);
WORD GetTriggerMode (ID);
 Format
WORD SetTriggerMode (WORD, WORD);
WORD GetTriggerMode (WORD);
 Arguments
ID
TriggerMode
 Return code
For trigger mode control
Same as for CheckSensor function
Status acquisition
12
USB ID number
Specify MCD controller USB ID number
Set trigger mode （ internal trigger, external trigger, external
start ）
internal trigger
external trigger
external start
0
1
2
HAMAMATSU PHOTONICS K.K.
0
1
2
internal trigger
external trigger
external start