5-10 PULSE OUT CONTROL
Controls the output from the PULSE OUT terminal. The return values are 1 with normal
completion, and other than 1 with an error. The PULSE OUT status may be obtained as the
return value for the function.
Function name
WORD SetShutterControl (ID, ShutterControl);
WORD GetShutterControl (ID);
Format
WORD SetShutterControl (WORD, WORD);
WORD GetShutterControl (WORD);
Arguments
ID
ShutterControl Set PULSE OUT output ( ON, OFF )
Return code
For PULSE OUT control
Same as for CheckSensor function
Status acquisition
USB ID number
Specify MCD controller USB ID number
OFF
0
ON
1
0
OFF
1
ON
HAMAMATSU PHOTONICS K.K.
C7557-01 DLL INSTRUCTION MANUAL
15