Amp Gain Control - Hamamatsu Photonics C7557-01 Instruction Manual

C7557-01 DLL INSTRUCTION MANUAL
5-5

AMP GAIN CONTROL

Controls the gain for the sensor output amp in the MCD controller. The return values are 1
with normal completion, and other than 1 with an error. The amp gain status may be
obtained as the return value for the function.
 Function name
WORD SetAmpGain(ID, AmpGain);
WORD GetAmpGain(ID);
 Format
WORD SetAmpGain(WORD, WORD);
WORD GetAmpGain(WORD);
 Arguments
ID
AmpGain
 Return code
For amp gain control
Same as for CheckSensor function
Status acquisition
10
USB ID number
Specify MCD controller USB ID number
Set amp gain (Low/Middle/High)
x1/2 ： 0 x1 ： 1
x10 ： 4 x20 ： 5
0 ： x1/2 1 ： x1
4 ： x10 5 ： x20
HAMAMATSU PHOTONICS K.K.
x2 ： 2 x5 ： 3
x50 ： 6 x100 ： 7
2 ： x2 3 ： x5
6 ： x50 7 ： x100