Node Information Frame; Command Classes - Vision VIS ZS6301 Quick Start Manual

Co detector

between maximal battery life time and the desired responses of the device.

Hitting the program button will wake up the device.

It is possible to set the node ID to 255 to send wakeup notifications as broadcast. In this mode device takes more time to

go to sleep and drains battery faster, but can notify all it's direct neighbors about a wakeup.

Node Information Frame

The Node Information Frame is the business card of a Z-Wave device. It contains information

about the device type and the technical capabilities. The inclusion and exclusion of the device is confirmed

by sending out a Node Information Frame. Beside this it may be needed for certain network operations to

send out a Node Information Frame.

Hitting the program button will send out an Node Information Frame

Associations

Z-Wave devices control other Z-Wave devices. The relationship between one device controlling

another device is called association. In order to control a different device, the controlling device needs to

maintain a list of devices that will receive controlling commands. These lists are called association groups

and they are always related to certain events (e.g. button pressed, sensor triggers, ...). In case the event

happens all devices stored in the respective association group will receive a common wireless command.

Association Groups:

1 alarm messages (max. nodes in group: 5)

Supported Command Classes

Battery (version 1)

Basic (version 1)

Wake Up (version 2)

Association (version 1)

Version (version 1)

Alarm (version 2)

Manufacturer Specific (version 1)

Alarm Sensor (version 1)

Table of Contents