Part Names Of The Projector - NEC PV800UL-W User Manual

1-3. Part Names of the Projector

Front
The lens is sold separately. The description below is for when the NP13ZL lens is mounted.
1
2
3
4
1. Remote Sensor
This part receives signals from the remote
control. There are two locations on the front
and back of the projector.
2. Intake vent
Takes in outside air to cool the unit.
3. Security Bar
Attach an anti-theft device. The security bar
accepts security wires or chains up to 0.18
inch/4.6 mm in diameter.
4. Adjustable Tilt Foot
Rotate the tilt feet to adjust the left/right
orientation.
5. Indicator Section
The indicator light turns on or blinks to
relay the status of the projector (Power ON/
Standby/etc.)
6. Lens
Images are projected from here. (Lens unit
sold separately.)
1. Check the product overview, supplied items and part names
7. Lens Cap
(The optional lens is shipped with the lens
cap.)
8. Lens Release Button
Use this to remove the lens unit.
4
5
1
6
7
2
8