NEC PV800UL-W User Manual page 55

2. Projecting an Image (Basic Operation)
NOTE:
• If the lens is shifted to the maximum in the diagonal direction, the screen peripheral area will be dark or shaded.
• Use NP11FL at the home position. If necessary, fine-adjust the position of the projected image using the lens shift function.
• Fix the NP50ZL to the projector using the supplied support kit. Loosen the bolts of the support kit, you can adjust the lens shift.
• Fix the NP44ML to the projector using the separately sold support kit (NP01LK). Lens shift is not available for the NP44ML.
TIP:
• The figure below shows the lens shift adjustment range (projection method: Desktop/Front) of the NP41ZL lens unit.
50 %V
H
100 %V
V
10 %H 10 %H
10 %V
100 %H
20 %H 20 %H
Description of symbols: V indicates vertical (height of the projected image), H indicates horizontal (width of the projected image).
26