Part Names Of The Projector - NEC VT58 User Manual

Part Names of the Projector

Front/Top
Zoom Lever (VT580/VT480/VT58)
Digital Zoom Button (VT48)
Remote sensor
( → page 7)
Focus Ring
( → page 23)
Lens Cap
* This security slot supports the MicroSaver ® Security System. MicroSaver ® is a registered trademark of
Kensington Microware Inc. The logo is trademarked and owned by Kensington Microware Inc.
Rear
Terminal Panel
( → page 6)
Monaural Speaker
(1W)
( → page 23)
Lens
Adjustable Tilt Foot
( → page 22)
Main Power Switch
When you plug the supplied power cable into an active wall outlet
and turn on the Main Power, the POWER indicator turns orange
and the projector is in standby mode.
( → page 19)
Controls
( → page 5)
Ventilation (inlet) / Filter Cover
( → page 49)
Two filters on VT580 and VT480
One filter on VT58 and VT48
Built-in Security Slot (
Adjustable Tilt Foot Button
( → page 22)
Remote sensor (VT580 and VT480 only)
( → page 8)
Ventilation (outlet)
Heated air is exhausted from here.
AC Input
Connect the supplied power cable's two-pin plug here, and
plug the other end into an active wall outlet. ( → page 18)
3
1. Introduction
)*