Advertisement
2.4.7 Primary/Secondary IDE Connector (Two 40-pin IDE)
These connectors support the provided IDE hard disk ribbon cable. Connect your first IDE hard disk
to master mode of the primary channel. If you have second IDE device to install in your system,
connect it as slave mode on the same channel, and the third and fourth device can be connected on
secondary channel as master and slave mode respectively.
There are three connectors on the 80-pin IDE ribbon cable. The blue connector must connect with
motherboard's IDE connector and the other connectors must connect with HDD. In order to get the
better performance the Ultra DMA 66 HDD must connect with 80-pin IDE ribbon cable.
2.4.8 PS/2 Mouse Port (5-pin MOUSE)
The system will direct IRQ12 to the PS/2 mouse.
2.4.9 Serial Port (Two 10-pin COM)
2.4.10 USB Connectors (Two 5-pin USB)
You can attach USB devices to the USB connector.
Advertisement
