Advertisement
Set to Enabled if your AGP card supports the 2X mode, which uses a double-clocked data technique
to transfer twice the data per each AGP clock.
3.4.12 CPU Host/PCI Clock
Supports Default, 66, 75, 83, 100, 103, 112, 124, 133, 140 or 150MHz external frequency. Select
Default, 66, 75 or 83MHz if your CPU is 66MHz FSB and select Default, 100, 103, 112 or 124, if the
CPU is 100MHz FSB. When CPU is 133MHz FSB, you can select the 124, 133, 140 or 150MHz.
The 75, 83, 103, 112, 124, 140 and 150 MHz frequency are optional.
The frequency mapping table of the elements:
Ext. frequency
66MHz
75MHz
83MHz
100MHz
103MHz
112MHz
124MHz
124MHz
133MHz
140MHz
150MHz
Notice:
The 75, 83, 103, 112, 124, 140 and 150MHz frequency are over specification.
You must install 8ns or faster DIMM on board if you set 103, 112 or 124MHz as external frequency
and must install 7ns or faster DIMM on board if you set 133 or 140MHz as external frequency. If the
external frequency is 150MHz, you must have installed 6ns or faster DIMM on board.
Warning: Over specification operations are not recommended.
3.5 Power Management Setup
Power management decreases power usage under the pre-defined standby time range.
AGP
PCI
66MHz
33MHz
75MHz
37.5MHz
83MHz
41.6MHz
66MHz
33MHz
68.6MHz
34.3MHz
74.6MHz
37.33MHz
82.6MHz
41.33MHz
82.6MHz
31MHz
66MHz
33.25MHz
70MHz
35MHz
75MHz
37.5MHz
Figure 3-5. POWER MANAGEMENT SETUP SCREEN
ROM PCI / ISA BIOS (XXXXXXXX)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
ISA
8.33MHz
8.33MHz
8.33MHz
8.33MHz
8.33MHz
8.33MHz
8.33MHz
8.33MHz
8.33MHz
8.33MHz
8.33MHz
Advertisement
