Advertisement
User's Manual & Quick Installation Chart
1.5 MotherBoard Layout
Chapter 2. Hardware Setup
2.1 Installation Procedure
1. Jumper settings (BIOS and CPU)
2. Installation of CPU
3. Installation of Memory
4. I/O Connections & Panel Connections
2.1.1 Jumper Settings
In this manual , (1-2) represents the first and second pins of the jumper. (2-3) represents the second
and third pins of the jumper. On the motherboard, you will see two sets of jumpers with different
color jumper caps:
Yellow Jumper Caps:
Green Jumper Caps:
Red Jumper Caps :
WARNING: Electronic parts are Static sensitive. To prevent damage to the computer and its parts
please take the following measures.
Work on a surface such as concrete, linoleum or hard wood floor.
Ground your self with either a properly installed grounding strap or by touching a major
electrical appliance long enough to discharge the static.
2.1.2 Clearing the CMOS(Yellow Jumper Caps)
JRTC: CMOS Function Selection
1-2:Clear data
2-3:Normal Operation(Default Setting)
Sets the Function of Flash CMOS
Green Jumper Caps:Sets the type and speed of CPU JF0, JF1, JF2, JF3
Sets the FSB frequency of CPU
JRTC
JFSB0, JFSB1
Advertisement
