Connecting Ibm Pc/At - NEC IE-784000-R User Manual

6.4 Connecting IBM PC/AT

To connect the IBM PC/AT, use the PC bus interface.
– General
• Turn off power.
• Connect channel 3 of the IE-784000-R and the IBM PC/AT (hereafter referred to as the "host machine") with
the PC bus interface cable.
• Turn on power.
Host machine
– Connecting
(1) Turn off power.
Before connection, turn off the power to each equipment. If power to the IE-784000-R and host machine
is on, be sure to turn it off.
(2) Set the IE-70000-PC-IF-B board.
(3) Insert the board to an expansion slot of the host machine.
(4) Connect the IE-784000-R with the host machine.
58
CHAPTER 6 CONNECTING PERIPHERAL EQUIPMENT
PC bus interface cable
Expansion board
IE-70000-PC-IF-B
Table 6-4 Cable Connection
IE-784000-R Connecting Cable
CH3 PC bus interface cable
IE-784000-R
CH3
Host Machine
IE-70000-PC-IF-B