NEC IE-784000-R User Manual page 85

(1) LOCAL ETHERNET ADDRESS
Indicates the Ethernet address of the station. This parameter is only displayed and cannot be set.
(2) LOCAL IP ADDRESS
Sets the IP address of the station. Input an 8-digit hexadecimal number.
<1> LOCAL IP ADDRESS
<2> NEW LOCAL IP ADDRESS
(3) LOCAL HOST NAME
Sets the host name of the station. Input up to 16 alphanumeric characters.
<1> LOCAL HOST NAME
<2> NEW LOCAL HOST NAME
(4) LOCAL PORT NO.
Sets the port number of the station. Input a 4-digit hexadecimal number except 0.
<1> LOCAL PORT NO.
<2> NEW LOCAL PORT NO.
(5) REMOTE ETHERNET ADDRESS
Sets the Ethernet address of the other station. Input a 12-digit hexadecimal number.
<1> REMOTE ETHERNET ADDRESS
<2> NEW REMOTE ETHERNET ADDRESS >
(6) REMOTE IP ADDRESS
Sets the IP address of the other station. Input an 8-digit hexadecimal number.
<1> REMOTE IP ADDRESS
<2> NEW REMOTE IP ADDRESS
(7) REMOTE HOST NAME
Sets the host name of the other station. Input up to 16 alphanumeric characters.
If the other station is not specified, input ↓.
<1> REMOTE HOST NAME
<2> NEW REMOTE HOST NAME
CHAPTER 9 SETTING NETWORK INFORMATION
> XXXXXXXX
XX is currently set.
>
Set the new value to the position of
> XXXX
>
> XXXX
>
> XXXXXXXXXXXX
XX is currently set.
Set the new value to the position of
If the current address is not changed, only input ↓.
> XXXXXXXX
XX is currently set.
>
Set the new value to the position of
If the current address is not changed, only input ↓.
> XXXX
>
↓
XX is currently set.
↓
Set the new value to the position of
XX is currently set.
↓
Set the new value to the position of
↓
↓
XX is currently set.
↓
Set the new number to the position of
.
.
.
.
.
.
85