Table of Contents
Advertisement
Channel 1 controls the RS-232C interface by setting the following five parameters (1) through (5) and sets network
information necessary for using the network interface.
Parameters (2) and (3) can be set by using the setting switch or jumper of channel 1. The other parameters, (1),
(4), and (5), are fixed and cannot be changed.
(1) Mode
Parameter
Mode
Modem mode
(2) Setting of FG
Parameter
Setting of FG
Open/short
(3) Baud rate
Parameter
Baud rate
Internal : 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 78600,
External : 19200 [bps]
(4) Handshake mode
Parameter
Handshake mode
Hardware/software shared
(5) Character specification
Parameter
Character length
8 bits
Parity bit
No parity
Stop bit length
2 bits
CHAPTER 8 FUNCTIONS OF RESPECTIVE CHANNELS
Contents
Contents
Contents
153600 [bps]
Contents
Contents
Setting
Fixed
Setting
JP3 shorted to FG side
Setting
Baud rate setting switch
Setting
Fixed
Setting
Fixed
75
Advertisement
Table of Contents
