Advertisement
4.2.
Assembly Instructions
1. Install MOTOR HEATER MOTOR BLOCK ASS'Y into
HOUSING A as below drawing.
2. Install HOUSING A method as below.
3. Install SWIVEL RING on HANDLE A and install CLICK
RING on HOUSING A then install HANDLE AB on
HOUSING AB method as below.
4. Insert an AIR OUTLET GRILL into an AIR OUTLET RING
by fix position as below.
5. Insert an AIR OUTLET RING into main body by fix posi-
tion as below.
6. Tightening screw both two TORX SCREWS and a TAP-
PING SCREW as below.
5
Advertisement
