1 Warning Caution: • Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder- ing iron, please be careful not to heat too long.
4 Disassembly and Assembly Instructions 4.1. Disassembly Instructions 1. Take off NOZZLE or DIFFUSER as same direction as 4. Take off HANDLE AB then take out CLICK RING and below. SWIVEL RING method as below. 2. Remove a TAPPING SCREW at HOUSING A by flat- blade screwdriver and two TORX SCREWS at HANDLE by Driver.
Page 5
4.2. Assembly Instructions 1. Install MOTOR HEATER MOTOR BLOCK ASS'Y into 4. Insert an AIR OUTLET GRILL into an AIR OUTLET RING HOUSING A as below drawing. by fix position as below. 5. Insert an AIR OUTLET RING into main body by fix posi- tion as below.
7 Exploded View and Replacement Parts List 7.1. Exploded View for : EH-ND61 All parts are supplied from PMFTH-AP through PLAP...
Page 9
7.2. Parts List for : EH-ND61 Safety Ref. No. Part No. Part Name & Description Quantity Remarks EHND61HS86BW HOUSING AB (BLACK) EHND61HDBW HANDEL AB (BLACK) EHND61T0312W TORX SCREW 3.0*12 (BLACK) EHND61CRTW CLICK RING (NATURAL) EHND61SRTW SWIVEL RING EHND61MH86BW MOTOR HEATER BLOCK...
Page 10
7.3. Exploded View for : EH-ND62 All parts are supplied from PMFTH-AP through PLAP...
Page 11
7.4. Parts List for : EH-ND62 Safety Ref. No. Part No. Part Name & Description Quantity Remarks EHND62HS86PW HOUSING AB (VIVID PINK) EHND62HDPW HANDEL AB (VIVID PINK) EHND62T0312W TORX SCREW 3.0*12 (SILVER) EHND62CRTW CLICK RING (NATURAL) EHND62SRTW SWIVEL RING EHND62MH86BW MOTOR HEATER BLOCK (B2-PLUG Include 5 Insulation Tubes) EHND62AORHW...