Table of Contents
Advertisement
Operation
4. Operation
Control Panel Operation
To access the control panel functions, use the four buttons located next to the display. Please refer to the
Product Overview
to see the button locations on the control panel.
Button
Function
<MENU> Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the numeric value when in a function
Navigates downwards through the menu list and decreases the numeric value when in a
<DOWN>
function
Enables the currently displayed menu or sets the currently selected value into the selected
<ENTER>
function
Menu Map
Refer to the COREpar UV120 ILS product page on
Main Level
1-Ch
5-Ch
iLS
P--
(Automatic program)
S--
Snd
(Sound-active)
SEnS
u--
(Dimmer)
diM
(Dimmer speed)
SEt
(Infrared)
Temp
Configuration (DMX)
The COREpar UV120 ILS works with a DMX controller. Information about DMX is in the CHAUVET DMX
Primer, which is available from the Chauvet website: www.chauvetdj.com.
DMX Personality and Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. Choosing a starting address that is too high could restrict the access to some of the product's
channels.
The COREpar UV120 ILS uses up to 5 DMX channels in a 5Ch DMX mode, which defines the highest
configurable address to 508.
For more information about the DMX protocol, download the DMX Primer from: www.chauvetdj.com.
To select the starting address, do the following:
1.
Press <MENU> repeatedly until 1Ch or 5Ch shows on the display.
2.
Press <ENTER> and d 1–512 will show on the display.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
COREpar UV120 ILS User Manual Rev. 1
Programming Levels
d 1–512
d 1–508
iLS 1–4
P 1
P 2
P 3
S. 1–100
Snd1
Snd2
u 0–100
d. 0–255
oFF
diM1
diM2
diM3
on
ir
off
yes
rESt
no
__
www.chauvetdj.com
for the latest menu map.
Description
1-channel DMX mode
5-channel DMX mode
Sets ILS mode
Pulse effect 0-100%-0
Pulse effect 0-100%
Pulse effect 100%-0
Automatic program speed
Sets sound active mode
Sound sensitivity
Manual Dimmer
Sets the dimmer speed
Enables/disables infrared control
Reset to factory default
Shows the temperature
Page 8 of 15
Advertisement
Table of Contents
