Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
Orientation
The COREpar UV120 ILS may be mounted in any position; however, make sure adequate ventilation is
provided around the product.
Rigging
•
Before deciding on a location for the product, always make sure there is easy access to the product
for maintenance and programming purposes.
•
Make sure that the structure onto which the product is being mounted can support the product's
weight (see the
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
•
When power linking multiple products, mount the products close enough for power-linking cables to
reach.
•
The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired
angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
Mounting Diagram
Mounting clamp
(such as CLP-15 or CLP-15N from Chauvet)
Mounting bracket
Bracket
adjustment knob
Page 7 of 15
Technical Specifications
for weight information).
COREpar UV120 ILS User Manual Rev. 1
Setup
Safety
Notes.
Safety cable
(such as CH-05 from Chauvet)