Table of Contents
Advertisement
Operation
4. Operation
Control Panel Operation
To access the control panel functions, use the four buttons located next to the display. Please refer to the
Product Overview
to see the button locations on the control panel.
Button
Function
<MENU> Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
Menu Map
Refer to the EZLink Strip Q6BT ILS product page on
Mode
Programming Levels
4Ch
DMX Mode
6Ch
16Ch
ILS Mode
iLS
Static
C--
Colors
Automatic
P--
Programs
Auto
S--
Speed
Dimmer
d--
Sound-
Active
Snd
Mode
Sensitivity
SEnS
Custom
Color
u--
Mixing
Bluetooth
bLE
Mode*
Control
SEt
Mode
*The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such
marks by Chauvet & Sons, LLC is under license. Other trademarks and trade names are those of their respective owners.
Configuration (DMX)
The EZLink Strip Q6BT ILS works with a DMX controller. Information about DMX is in the CHAUVET DMX
Primer, which is available from the Chauvet website: www.chauvetdj.com.
DMX Personality and Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. Choosing a starting address that is too high could restrict the access to some of the product's channels.
The EZLink Strip Q6BT ILS uses up to 16 DMX channels in a 16Ch DMX mode, which defines the highest
configurable address to 497.
For more information about the DMX protocol, download the DMX Primer from: www.chauvetdj.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 4Ch, 6Ch or 16Ch shows on the display.
2. Press <ENTER> and d 1–509 will show on the display.
3. Use <UP> or <DOWN> to select the starting address.Press <ENTER>.
EZLink Strip Q6BT ILS User Manual Rev. 1
www.chauvetdj.com
Description
4-channel DMX mode
d 1–509
6-channel DMX mode
16-channel DMX mode
iLS1–4
Sets ILS mode
C 1–15
Static colors
P 1–8
Automatic programs
S. 1–100
Program speed for P 1–8
L. 1–255
Dimmer
Snd1–8
Sound-active programs
u 0–100
Sound sensitivity
r. 0–255
G. 0–255
Custom static colors combine red, green, blue, and
amber
b. 0–255
A. 0–255
S. 0–100
Strobe rate
_ _ _ _ _
Bluetooth control mode, displays Bluetooth ID
on
ir
Turns infrared on or off
oFF
SLAV
Enable Master/Slave with other BT products
out
dMX
Enable Master/Slave with non-BT products
for the latest menu map.
7
Advertisement
Table of Contents
