This manual corresponds to the following references: With Solder Wire Perforation Without Solder Wire Perforation: for wire ø 0.8mm: for wire ø 0.4mm: - ALE-908UVA (100V) - ALE-204UA (230V) - ALE-108UVA (120V) for wire ø 0.5mm: - ALE-208UVA (230V) - ALE-205UA (230V) for wire ø...
Page 3
para manuales - color gris 200 mm The following items are included according purchased reference: 130 mm 130 mm Components already Components already assembled in assembled in Control Unit Control Unit 100 mm 80 mm Solder Wire Guide Kit ..........................1 unit 60 mm With solder wire perforation: Without solder wire perforation:...
Features and Connections ALE250 Automatic-Feed Soldering Iron* Solder Reel Stand Automatic-Feed Soldering Control Unit Control Screen SOLDER WIRE USB-A GUIDE Connector Kit for ALE250 availabe for different solder wire diameters see page 11 + 12 Main Switch Peripherials RJ12 Connection for Robot System ALES Stand for ALE250...
Page 5
para manuales - color gris 200 mm Solder Reel Assembly 130 mm 130 mm Reel Locking Axis 100 mm Reel Locking Screw Solder Reel Solder Wire 80 mm Guidedance 60 mm Solder Wire 50 mm Open the reel locking screw (1) and remove the reel locking (2) from the axis. 19:29 19:29 19:29...
Exit Press ok to exit Ø 1.00 mm Ø 1.00 mm Ø 1.00 mm Ø 1.0 Ø 1.00 mm Ø 1.00 mm Ø 1.00 mm 19:29 Language Edit program Edit program º º º Mode Program º 19:29 Program #1 Program #4 Sta�on se�ngs Edit program...
Page 7
para manuales - color gris 200 mm Intermediate Guide Wire Inlet Nozzle Tube Nozzle Main Menu Screen 130 mm 130 mm Acces to Main Menu by , select “Feeder Settings” (1) and then “Wire Diameter” (2) to adjust the value to the current solder wire diameter. 100 mm 80 mm Tin Reloaded Process Screen...
Control Process Feeder Setting Modes Choose between “continuous”, “discontinuous” and “program” mode. Access to Main Menu by select “Feeder Settings” and then “Mode”. Depending on the selected mode, different parameters are available for setup. Continuous Mode Discontinuous Mode Program Mode Troubleshooting Station troubleshooting available on the product page at www.jbctools.com...
para manuales - color gris 200 mm Control Process 130 mm 130 mm Program Mode 100 mm 80 mm 60 mm 50 mm Quick Access to Feeder Setting Modes 40 mm The solder wire dispensing values can be directly set up from the work screen. Press to change the tool temperature value.
Control Process Language Menu Screen Default PIN: 0105 Station Settings choose between mm and inches Feeder Settings Tool Settings Counters Press enter when finished partial and total counters are shown...
Page 11
para manuales - color gris 200 mm Mode Con�nuous Mode Con�nuous º º Changing Guide Kits 20.0mm/s Speed 20.0mm/s Speed Mode Con�nuous Mode Con�nuous º º 130 mm 130 mm Off 20.0mm/s Feeder parameters lock 20.0mm/s Feeder parameters lock Speed Off...
Page 12
Accesories Various guide sets are available. Select the appropriate guide set depending on the solder wire diameter to be used. Solder Wire Guide Kits for ALE250 with Solder Wire Perforation...
Page 13
para manuales - color gris 200 mm Accesories 130 mm 130 mm Solder Wire Guide Kits for ALE250 without Solder Wire Perforation 100 mm 80 mm 60 mm 50 mm 40 mm...
EARTH FUSE F1.25 A EARTH FUSE F1.25 A EARTH FUSE F1.25 A EARTH FUSE F1.25 A - Replace any defective or damaged pieces. Only use original JBC spare parts. - Repairs should only be performed by a JBC authorized technical service.
Page 15
para manuales - color gris 200 mm Safety 130 mm 130 mm It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. 100 mm - Do not use the units for any purpose other than soldering or rework. Incorrect use may cause a fire. - The power cord must be plugged into approved bases.
Specifications Automatic-Feed Soldering Control Unit With Solder Wire Perforation for wire ø 0.8mm: Ref. ALE-908UVA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Output: 23.5V Ref. ALE-108UVA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Output: 23.5V Ref.
Page 19
para manuales - color gris 200 mm Specifications 130 mm 130 mm - Solder Wire Diameter: According purchased reference - Max. Wire Length: 250 mm / 9.84 in (for discontinous + program mode) - Min. Wire Length: 0.5 mm / 0.02 in 100 mm - Forward Speed Range 0.5 to 50 mm/s / 0.02 to 1.97 in/s...
Page 20
In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased. Get 1 extra year JBC warranty by registering here: https://www.jbctools.com/productregistration/ within 30 days of purchase. This product should not be thrown in the garbage.
Need help?
Do you have a question about the ALE Series and is the answer not in the manual?
Questions and answers