On Screen Display (Osd) Control Adjustment - Mitsubishi DiamondPoint NX85LCD User Manual

NX85LCDmanual060502.qxd 6/6/02 11:44 AM Page 6
On Screen Display (OSD) Control
Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of the display is quick and easy with
the On Screen Display Control system. A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available adjustments and selections you can make using
the OSD.
NOTE
: Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
MENU
AUTO/SELECT
AUTO/SELECT
MENU
1. Press the MENU Button, then the main menu of the OSD appears.
2. To access a control, use the or Buttons. When the icon you want becomes highlighted, press the
AUTO/ SELECT Button.
3. Use the Buttons to adjust the item to the desired level.
4. Accept the changes by pressing the AUTO/ SELECT Button.
5. Exit the OSD by Pressing the MENU Button.
6