Mitsubishi DiamondPoint NX85LCD User Manual page 7

NX85LCDmanual060502.qxd
Control Panel Functions
Control
P ROCE SS ING
AUTO CONFIGURATION
CO N T R O L S L O C KE D
C O N T R O L S U N L O C KED
6/6/02
Direct Access Function
2 AUTO adjustment function
When adjusting your display settings, always press the
AUTO/ SELECT button before entering the On Screen Display (OSD).
This will automatically adjust your display image to the ideal settings
for the current screen resolution size (display mode).
The best display mode is 1280x1024.
3
100
100
Bring up Contrast and Brightness adjustment.
5
SOURCE
Use this button to make Dsub or DVI connector active. This feature is
used when two computers are connected to the display. The default
setting is Dsub.
CONTROLS LOCKED/UNLOCKED: MENU and
This function allows you to secure the current control settings, so
that they cannot be inadvertently changed. Press and hold the MENU
button and button for 3 seconds: the message "CONTROLS
LOCKED" appears.
You can unlock the OSD controls at any time by pushing the MENU
button and button for 3 seconds: the message
"CONTROLS UNLOCKED" will appear.
11:44 AM Page 5
–continued
5