Mitsubishi Diamond Scan 90E User Manual page 21

Symbol of 1st
OSD layer
KEYSTONE
10
KE Y S T ONE
LEVEL: 00 - 100%
PIN-BALANCE
11
P I N - B AL A NCE
LEVEL: 00 - 100%
12
KEY-BALANCE
KE Y - B AL A NCE
LEVEL: 00 - 100%
H-MOIRE
13
H - MO I RE
LEVEL: 00 - 100%
V-MOIRE
14
V - MO I RE
LEVEL: 00 - 100%
2nd OSD layer
9 0%
9 0%
9 0%
9 0%
9 0%
Press the Minus Adjust Button:
The decrease the width at
the top of the screen image
and to increase the width at
the bottom.
To move the top and
bottom of the screen
image to the right.
To make the screen slant
to the left.
Press the plus or minus button to decrease the
level of the horizontal moire wave.
Press plus and minus buttons together, to restore
to factory preset level.
Press the plus or minus button to decrease the
level of the vertical moire wave.
Press plus and minus buttons together, to restore
to factory preset level.
20
Press the Plus Adjust Button:
The increase the width at
the top of the screen image
and to decrease the width
at the bottom.
To move the top and
bottom of the screen
image to the left.
To make the screen slant
to the right.