Power Save - Mitsubishi Diamond Scan 90E User Manual

4.2

POWER SAVE

N O T E
When the monitor has no sync signal or incorrect connection and the signal frequency is out of
range, the following CAUTION comes on the screen. Check input signal, signal cable connection
and signal frequency.
1. POWER SAVE IS OFF
When POWER SAVE is OFF and there is no sync signal, the following screen is displayed.
2. POWER SAVE IS ON
(1) When POWER SAVE is ON and there is
no sync signal, the following screen is
displayed for 5 seconds.
AT T E N T I ON
NO S I GNAL
P L E A S E C H E CK
I N P U T S I GNAL OR
CO N NE C T I ON .
3. POWER SAVE IS ON OR OFF
When signal frequency is out of range, the following screen(ex. 96.8kHz/73Hz timing
input) is displayed.
AT T E N T I ON
NO S I GNAL
P L E A S E C H E CK
I N P U T S I GNAL OR
CO N NE C T I ON .
(2) Before 2 seconds POWER SAVE function
AT T E N T I ON
S I GNAL F RE QUENCY
I S OU T OF RANGE .
P L E A S E C H ANGE
S I GNAL T I M I NG .
23
works, the following screen is displayed.
The power on indicator illuminates to
change Amber.
POWER S A V E