Instrument Panel; Hourmeter - Walker T27i Operator's Manual

Operating Instructions

Instrument Panel

This illustration shows the configuration of the
switches and indicators located on the instru-
ment panel.

Hourmeter

Voltmeter
Light Switch
(Optional)
Hourmeter
The hourmeter, which is located on the instrument
panel, displays operating time accumulated while
the ignition switch is in the ON (RUN) position.
Some tractors are equipped with hourmeters that
provide maintenance reminders after certain hours
of operation. The hourmeter screen will start flash-
ing the reminder one hour prior to the recommend-
ed interval and will continue until one hour after the
recommended interval (two hours).
● 4-6 hours: Oil Change (Break-In)
● 24-26 hours: Lube
● 49-51 hours: Oil Change
The hourmeter reminders are set for the most
frequent service intervals. Follow the intervals
outlined in the Maintenance Schedule Chart on
page 55 for this tractor.
34
Oil Pressure Over Temperature
Warning Light
Circuit Breaker - 7 Amp
Instrument Panel
Engine
Warning Light Service Light
The hourmeter does not have a manual reset
function.
NOTE: The blinking hour glass on the display
means that the meter is operating properly.
Ignition
Switch
Warning
Horn
Hourmeter
T27i