Portability Base - Rifton HTS Product Manual

Portability base with
carry-bag
WARNING
• The portable base is intended for
travel use only and should not be used
as the primary base. Ensure adequate
stability when using the portable base.
• Check that the two pieces of the frame
are fully engaged before attaching the
seat.
• Always make sure both seat hooks
are inserted into the base sockets and
that both seat latches at the front are
latched to base.
Figure 20a:
weight, foldable frame with a carry-bag.
This base fits in the back pouch of the
carry-bag.
Figure 20b:
other components fit into the front pouch
of the carry-bag.
Figure 20c:
both halves of the frame and insert the
square peg of one half into the square
tube of the other half of the frame. Make
sure the two pieces of the frame are fully
engaged before attaching the seat.
Figure 20d:
frame as described on previous page (see
figure 19d).
20
To prevent falls and
injuries:
The portability base is a light-
The seat, back, armrests and
To assemble the base, unfold
Then attach the seat to the
Figure 20a
Figure 20b
Figure 20c
Figure 20d