Butterfly Harness And Push Handles - Rifton HTS Product Manual

Butterfly harness
WARNING
other injuries:
• Tighten the seatbelt portion of the
butterfly harness before tightening the
upper straps.
• Check fit of harness after every
adjustment.
Figure 13a:
remove the center section of the seatbelt
(A). Replace it with the butterfly harness
(B), which has a built-in seatbelt.
Figure 13b:
then clip the shoulder straps to the sockets
on the backrest.
Figure 13c:
to attach the shoulder straps through the
upper slot in the backrest.
Push handles
Figure 13d:
available for the HTS mobile base. They
attach using the same extrusion (C) as the
laterals at the back of the backrest.
13
To prevent falls,
strangulation or
To attach the butterfly harness,
Adjust the seatbelt tension,
For small users, you may wish
A pair of push handles is
B B
A A
Figure 13a
Figure 13b
Figure 13c
C C
Figure 13d