Table of Contents
Advertisement
Components
Seat and back pads
The seat and back pads are removable
for cleaning. They are made of durable,
closed-cell polyethylene foam.
Figure 12a:
pad. The rear-open pad has a wide opening
which facilitates rear hygiene care. The
rear-closed pad has a narrower opening,
closed at the back providing more support
for the user.
Figure 12b:
and comes with a rigid, white plastic hole
filler (A) to stabilize the seat.
The back pad is held in place by a rim that
stretches over the edges of the backrest.
Figure 12c:
snaps (B) that snap into the holes in the
seat.
Headrest
WARNING
always use seatbelt while the headrest
is in use.
Figure 12d:
height, push height button (C). Insert the
stem of headrest into the headrest slot
to desired height. Release the button
and adjust height until the latch audibly
engages.
To adjust depth and angle of headrest,
loosen oval knobs (D), adjust to the desired
position and retighten the knobs.
12
There are three styles of seat
The no-hole pad has no hole
The seat pads attach with four
To prevent head
entrapment or injury,
To attach and adjust headrest
rear-open
rear-closed
Figure 12a
Figure 12b
B B
Figure 12c
D D
C C
Figure 12d
no-hole
A
A
Advertisement
Table of Contents
