Advertisement
KNOW YOUR PRODUCT
BRUSHLESS IMPACT WRENCH
1.
Speed Setting Button
2.
Speed Setting Indicator
3.
½" Square Drive Shaft
4.
Forward/Reverse Lever
5.
On/Off Trigger
1
2
3
4
5
6
7
8
9
BATTERY & CHARGER
This tool is compatible with all batteries & chargers from the Ozito PXC range.
For optimal performance, we recommend the use of a 3.0Ah battery or
higher to operate this PXC Impact Wrench.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
6.
Sure Grip Handle
7.
LED Worklight
8.
Battery Seating
9.
Belt Clip
SETUP & PREPARATION
1. ASSEMBLY
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Attaching The Belt Clip
The belt clip can be installed on either side of the tool.
1. Align the tabs on the belt clip
with the cutouts on the side of
the tool you want to attach the
belt clip.
2. Insert the screw supplied and
tighten to hold the belt clip in
place.
Fitting & Removing Drive Sockets
1. Align the square end of a ½"
drive socket with the drive shaft
and push it on until it clicks into
place.
2. Pull the socket off the drive shaft
to remove it.
WARNING!
DO NOT HANDLE ACCESSORIES
WITHOUT GLOVES AS THEY CAN BECOME HOT
AFTER USE, POTENTIALLY CAUSING PERSONAL
INJURY.
Advertisement
