Download Print this page
Ozito PXBWS-400 Manual

Ozito PXBWS-400 Manual

Advertisement

Quick Links

½" IMPACT
WRENCH
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
No Load Speed:
0-2,100/min
Max. Torque:
200Nm (Speed 1)
280Nm (Speed 2)
400Nm (Speed 3)
Impact Rate:
0-3,300/min
Drive Shaft:
12.7mm (½") Square
Weight:
2.0kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO INDUSTRIES PTY. LTD.
WARRANTY
25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
STANDARD EQUIPMENT
Brushless Impact Wrench &
Belt Clip
PXBWS-400
0722

Advertisement

loading

Summary of Contents for Ozito PXBWS-400

  • Page 1 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175. 0722...
  • Page 2: Know Your Product

    AFTER USE, POTENTIALLY CAUSING PERSONAL INJURY. BATTERY & CHARGER This tool is compatible with all batteries & chargers from the Ozito PXC range. For optimal performance, we recommend the use of a 3.0Ah battery or higher to operate this PXC Impact Wrench.
  • Page 3 2. BATTERY FITMENT 3. CONTROLS Installing The Battery Pack Forward/Reverse Lever 1. Slide the battery into the tool 1. To fasten bolts, push the FORWARDS base until it clicks into place. forward/reverse button towards the left of the tool. 2. Push the button towards the right of the tool to reverse the rotation.
  • Page 4: Operation

    WARNING! USE THE IMPACT WRENCH ONLY FOR TIGHTENING AND LOOSENING SCREWS AND NUTS. IF YOU WANT TO USE THE IMPACT WRENCH TO TIGHTEN SCREWS AND NUTS TO A SPECIFIC TORQUE, A TORQUE LIMITER MUST BE USED. PXBWS-400...
  • Page 5: Maintenance

    Please recycle where facilities exist. Check with your local council authority for recycling advice. Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the tool by an unauthorised person or by Recycling packaging reduces the need for landfill and raw mishandling.
  • Page 6: Electrical Safety

    ELECTRICAL SAFETY WARNING! Read the whole manual carefully and make sure you know how to switch the Refer to the PXC battery and charger manuals for information regarding charging, use and tool off in an emergency, before operating the tool. storage.