Advertisement

Quick Links

CORDLESS
DRILL DRIVER
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
Chuck Size:
13mm Keyless
No Load Speed:
0-350 / 0-1,250/min
Torque Setting:
18
Max. Torque:
40Nm
Charge Time:
30mins (1.5Ah)
60mins (3.0Ah)
Weight:
1.1kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
WHAT'S IN THE BOX
Cordless Drill Driver
Cordless Impact Driver
Cordless Blower / Inflator with
Adapters
1.5Ah & 3.0Ah Battery
Fast Charger
PXDIB-450
0317

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXDIB-450 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito PXDIB-450

  • Page 1 60mins (3.0Ah) Weight: 1.1kg ozito.com.au Fast Charger PXDIB-450 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS DRILL DRIVER 1. BATTERY & CHARGING (PXDDS-201) 1 Keyless Chuck 5 Belt Clip CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD 2 Torque Adjustment Collar 6 Forward/ Reverse Lever BE PROTECTED BY A RESIDUAL CURRENT DEVICE 3 Variable Speed Trigger 7 Gearbox speed selector (RATED AT 30MA OR LESS).
  • Page 3: Battery Installation

    2. BATTERY INSTALLATION Installing the Battery Pack Charging your lithium ion battery - Eco Charger 1 Connect the charger into a mains power outlet. 1 Slide the battery into the drill base until it clicks into place. 2 The charger LED will flash green showing power is being supplied to the charger.
  • Page 4: Operation

    OPERATION 3. KEYLESS CHUCK 4. CONTROLS Forward/ Reverse Lever WARNING! Ensure the tool is turned off & disconnected from the power supply before performing any of the following operations. 1 For forward rotation, push the fwd/rev lever towards the left side of the drill. For reverse rotation push fwd/rev lever to the right.
  • Page 5: Helpful Tips

    This measure will prevent the drill bit from slipping off centre as you start the the drill do all the work. hole. When drilling metals, use light oil on the drill bit to keep it from overheating. The oil will prolong the life of the bit and increase drilling action. PXDIB-450...
  • Page 6: Maintenance

    Variable speed trigger is locked Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the drill by an unauthorised person or by mishandling. Ensure that the forward / reverse lever is in the correct position; pressed left for forwards direction, pressed right for backwards direction.
  • Page 7: Spare Parts

    This charger is not intended for any uses other than charging rechargeable batteries. Any other use may result in risk of visit www.ozito.com.au or contact Ozito Customer fire, electric shock or electrocution. Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive internal Service: heat.
  • Page 8: Electrical Safety

    The power supply for this products charger should be protected by a residual current device (rated at 30mA Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. or less). A residual current device reduces the risk of electric shock.
  • Page 9: Warranty

    60mins (3.0Ah) Weight: 1.4kg ozito.com.au Fast Charger PXDIB-450 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 10 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS IMPACT DRIVER (PXIDS-300) 1. ASSEMBLY 1 Drive Bit Retaining Ring 4 Belt Hook 2 Tri-Beam LED Light 5 Forward/ Reverse Lever WARNING! ENSURE THE TOOL IS SWITCHED OFF AND 3 Variable Speed Trigger THE BATTERY IS REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS.
  • Page 11 2. BATTERY & CHARGING Charging your lithium ion battery - Eco Charger CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD 1 Connect the charger into a mains power outlet. BE PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED AT 30MA OR LESS). 2 The charger LED will flash green showing power is being supplied Charging your lithium ion battery - Fast Charger...
  • Page 12: Driving Procedure

    6 Slowly increase pressure on trigger to appropriate torque for circumstances until screw or bolt is tightened. Note: Do not force the driver or apply side pressure to elongate the hole. Let the impact driver do the work. PXIDS-300 PXDIB-450...
  • Page 13 Recycle battery Do not put in the rubbish Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the impact driver by an unauthorised person or by mishandling of the Do not incinerate Do not get battery wet impact driver.
  • Page 14: Impact Driver Safety Warnings

    The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.
  • Page 15 60mins (3.0Ah) Weight: 1.0kg ozito.com.au Fast Charger PXDIB-450 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 16 KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS BLOWER / INFLATOR 1. BATTERY & CHARGING (PXWBS-200) 1 Blower Nozzle 4 Sure Grip Handle 2 Blower Housing 5 Battery Seating CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD BE PROTECTED BY A RESIDUAL CURRENT 3 On/Off Switch 6 Inflation Adaptors x 3 DEVICE (RATED AT 30mA OR LESS).
  • Page 17: Fitting The Battery

    2. FITTING THE BATTERY Charging your lithium ion battery - Eco Charger Inserting & Removing the Battery 1 Connect the charger into a mains power outlet. 1 Align the ribs of the battery with the recess at the rear of the blower and 2 The charger LED will flash green push in until it clicks into place.
  • Page 18 OPERATION 3. ASSEMBLY 4. CONTROLS WARNING! DO NOT USE THE BLOWER WITH ANY WARNING! ENSURE THE TOOL IS SWITCHED OFF AND DISCONNECTED FROM THE POWER SUPPLY BEFORE ACCESSORIES OR ATTACHMENTS OTHER THAN THOSE PERFORMING ANY OF THE FOLLOWING TASKS. SUPPLIED. SUCH USAGE MIGHT BE HAZARDOUS. Connecting the blower nozzle Switching On and Off 1 The blower end is equipped...
  • Page 19 ENSURE THE BLOWER OUTLET IS NOT BLOCKED DURING USE. 5 Fit small end of adaptor to the inlet on the device to be inflated. Once fitted, use On/ Off switch to inflate device. 6 To Remove adaptor, turn in anti-clockwise direction. PXDIB-450...
  • Page 20 To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery pack will not reduce this risk. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the Never attempt to connect 2 chargers together.
  • Page 21 Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.
  • Page 22 BLOWER / INFLATOR SAFETY WARNINGS • Always wear adequate protective clothing when operating the blower to avoid injuries to face, eyes, • Do not get distracted and always concentrate on what you are doing. Use common sense. Never hands, feet, head or hearing. Use safety glasses or a face shield, high boots or sturdy shoes, long operate the tool when you are tired, sick or under the influence of alcohol or other drugs.

Table of Contents