2.3 Machine Settings; Printer Setting; Printhead Setting; G-Code Flavor - Flashforge Cura Setup

2.3 On the Machine Settings window, kindly fill in the Printer spec as suggested in the red. Switch
to Extruder 1 to confirm the extruder setting as suggested in the red. Then click Next to proceed.

Printer Setting

X (Width) 230.0
Y (Depth) 150.0
Z (Height) 140.0
Build plate shape: Rectangular
√
Original at Center
√
Hotend bed

G-code flavor

Marlin
Start G-code：

Printhead Setting

X min -20
Y min -10
X max 10
Y max 10
Gantry Height 140.0
Number of Extruders 1
End G-code：