2. Guarantee
For guarantees please refer to the
respective terms and conditions of
supply for your country.
The installation, electrical
connection and first operation
of this appliance should be carried
out by a qualified installer.
3. Fault elimination for the user
Fault
No hot water
Water not hot enough
8
good supplied which have not been in-
stalled and operated in accordance with
the manufacturer's instructions.
Cause
- Circuit breaker off
- Not enough flow rate to
activate unit
- Water flow too high
- Voltage too low
The company does not
accept liability for failure of any
Rectification
- Turn circuit breaker on
- Clean filter faucet aerator
or shower head
- Reduce water flow
- Supply correct voltage to
unit.
STIEBEL ELTRON