AngelTrax SDX2 User Manual page 34

* Vehicle type: ID/BUS/TAXI/TRAIN/TRUCK to be selected.
* Vehicle ID: Can set 8 digits/alphabets (0~9 or A~Z).
* Driver/Client: Can set 21 alphabets/digits.
C. Use /
D. Use /
E. Use /
D. Use /
E. Press Menu button to exit.
8.4 Factory default
A. Use /
B. Press button to enter [FACTORY DEFAULT] select mode.
FACTORY DEFAULT
LOAD FACTORY DEFAULT: [ NO ]
DEBUG MODE:
C. Use /
D. Press button to RUN this function. (When you press Enter button, the DVR
will go back to factory default. The screen will show "LOAD FACTORY DEFAULT
OK".)
E. Press Menu button to exit.
8.5 Update Code
A. Use /
B. Press button to enter [UPDATE CODE] select mode.
button to select Vehicle type.
to set Vehicle ID/Driver/Client.
to move the cursor.
or number keys to change the digits/alphabets.
button to select [FACTORY DEFAULT] setting section.
[ NO ]
button to select YES or NO.
button to select [UPDATE CODE] setting section.
33