Table of Contents
Advertisement
* NC = Normal Close: The signal loop is closed under normal condition.
When the loop becomes open, alarm will be triggered till the loop becomes
closed again. In other words, if the loop keeps opening for a period of time,
alarm will keep on being triggered in that time interval.
* NO = Normal Open: The signal loop is opened under normal condition.
When the loop becomes closed, alarm will be triggered till the loop
becomes opened again. In other words, if the loop keeps closing for a
period of time, alarm will keep on being triggered in that time interval.
*Full: Full screen
ALARM OUTPUT SETUP
CH TRIGGER
SECOND
1 [ 10 ]
C. Use
/
D. Use
/
time.
E. Press
Menu button to exit.
7.3 Sequence Setup
A. Use
/
B. Press
button to enter [SEQUENCE SETUP] select mode.
SEQUENCE SETUP
FULL SCREEN: [0 1 ] SEC
(1~10 seconds to be selected.)
C. Use
/
D. Press
Menu button to exit.
ALARM VIDEO MOTION
INPUT
LOSS DETECT
[YES]
[YES]
/
/
to select item for setting.
button to select ON/OFF the status and 1~60 seconds for the
button to select [SEQUENCE SETUP] setting section.
button to select value.
[YES ]
29
Advertisement
Table of Contents
