Table of Contents
Advertisement
The system will auto detect the hardware and enter Recording mode while
hardware is in normal condition.
If the system has not set the time yet, please press MENU
setup" to set the correct time.
If the screen has no video, please check whether A/V input connector is connected
with camera correctly or not.
Suggest to turn on camera power before turn on the system power.
The system is preset to OFF under [KEY LOCK] mode. If the system is set to ON
under [KEY LOCK] mode, the screen will show the following message. Please key
in security code by remote control number buttons to enter OSD Menu for setting.
Then, press
[Enter] button. If the screen shows below, it means the password
is correct.
If the screen shows below, it means the password is incorrect. Then, please enter
correct password in order to enter Main Menu or playback.
BEFORE OPERATION
OPERATION
LOGIN DVR
PLEASE ENTER PASSWORD
PASSWORD: 0000
SELECT NUMBER: 0~9
LOGIN SUCCESS
WELCOME TO DVR SYSTEM
LOGIN DVR
PASSWORD FAIL
PLEASE ENTER PASSWORD
PASSWORD: x x x x
SELECT NUMBER: 0~9
11
[ OK ]
key to "Date/Time
Advertisement
Table of Contents
