Table of Contents
Advertisement
5. ASSEMBLING - MOVE
ASSEMBLING | MOVE (1/3)
Mount the table mount using the table clamp. Assemble the
bottom of the flex arm and the table mount.
NB: For maximum stability at all magnfication levels, make sure to
mount the microscope on a sturdy table.
Mount the microscope to the top of the flex arm using the vesa
bracket, screws and handles.
NB: If you are purchasing a MOVE Upgrade kit for
an existing ZAP, we refer to the next section.
Mount the height adjustment wheels to the camera head with two
of the four provided screws. Then, adjust the position of the height
adjustment wheels and secure them to the camera head with the
two remaining screws.
5
Advertisement
Table of Contents
