tagarno MOVE Manual page 18

SETUP MENU (3/7)
2. GENERAL SETTINGS
1. Auto power off
Choose when the microscope should automatically shut down after a
period of inactivity. Select between: Never, 1 hour and 3 hours.
2. Lock presets
When this feature is enabled, users are prevented from accidentally
overwriting presets in the Preset manager.
The XPLUS control box can therefore simply be removed. The operator
can instead use an attached numerical USB keyboard to operate the
digital microscope.
3. File share mode
Activate File share mode to save images to the internal storage of the
microscope. The images can then be accessed via computers on the
same network as the microscope.
To access photos saved on the internal storage, see section ACCESS
SAVED FILES.
NB: To minimize security risk, it is highly recommended to disable SMB
1.0 support on any Windows based operating system on your corporate
network. You do this by accessing Programmes and Features in your
Control Panel.
4. Auto capture mode
To automatically capture images at a certain interval, activate the auto
image capture mode.
5. Auto interval
Set the function to automatically capture images at a certain interval.
Intervals start from 2 seconds and up. Start/stop the interval capturing
by pressing the image button on the control box.
6. Monitor auto detect
Turn off to manually set monitor width
7. Monitor width
Manually set your monitor width, if you do not wish to use the automatic
monitor auto detect, which is enabled by default. This automatically
changes the magnification level shown in the OSD. Please note that
manually changing the Monitor width while Monitor auto detect is
enabled, will disable the Monitor auto detect function.
8. System units
Choose to display metric or imperial units when using the microscope.
9. Numeric format
Here you can select the numeric format based on your preference.
Choose between 1,234.56, 1.234,56 or 1 234,56.
10. System language
The following languages are available as system language:
Chinese, Danish, English, French, German, Hungarian, Italian, Japanese,
Korean, Polish, Romanian, Russian and Spanish.
11. Keyboard layout
Select your horizontally language by pressing buttons left or right on the
XPLUS control box. The available languages are listed alphabetically.
The microscope is by default set to GB. The available languages are:
AF, AL, AT, BE, BR, BW, CA, CD, CZ, DE, DK, EE, ES, FI, FR, GB, HR, HU, IS,
IT, LT, LV, ME, MT, NL, NO, PH, PK, PL, PT, RO, RU, SE, SI, SK, SN, TZ, US,
VN and ZA.
12. Foot switch configuration
With this function, you can choose between Zoom Only and Zoom/
Focus on the foot switch.
Zoom/Focus is the default configuration. Setting the option to Zoom
Only allows you to zoom in/out with the foot switch, even if the
microscope is set in Manual focus mode by the control box.
18