Table of Contents
Advertisement
SYSTEM UPDATE (2/4)
Step 4: Access new application
If a new application is available (either through the 30 day trial
license of after application installation), a new menu point will
appear in the Setup menu under pt. 3 Applications, showing the new
application.
Note: To activate an application after installation, you need a unique
license key generated from the microscope serial number.
See the license activation section for further explanation on how to
activate your license.
After activating your license, you are now able to access and use the
new application or feature.
Please see the user manual for further information regarding the use
of TAGARNO applications.
If you have trouble performing a system update, please contact the
TAGARNO distributor from which you have purchased the product or
send an e-mail to support@tagarno.com.
MANUAL SYSTEM UPDATE
To perform a system update manually, a system update file needs to
be installed directly on the microscope.
Note: In some cases, it is necessary to complete more than
one system update processes, if an update contains substantial
improvements and considerable file sizes. The microscope will notify
you if this is needed.
Follow the few steps below to perform a system update to
your TAGARNO microscope.
Step 1: Download installation file
1.
Locate and access the installation file(s) via this link:
www.tagarno.com/firmware-download
2.
Download the installation file(s) to a USB memory stick
(FAT32 formatted)
3.
If the file(s) is in a ZIP folder, unzip the files and make sure that
only the correct installation file(s) or previous system update
files appear on the memory stick.
Note: File names always have the following format:
tagarno_fhd_system_vx_xx.image
tagarno_fhd_system_vx_xx.system
tagarno_fhd_system_vx_xx.update
(x_xx denoting the system version)
The installation file(s) is identical for TAGARNO FHD TREND/
PRESTIGE/UNO.
28
Advertisement
Table of Contents
