1. Manuals
  2. Brands
  3. tagarno Manuals
  4. Magnifiers
  5. ZAP STAND
  6. Manual

tagarno ZAP STAND Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MANUAL | TAGARNO ZAP STAND
VERSION: 1.0 | FIRMWARE 5.8 | 2023-01-01
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Go to tagarno.com/productmanuals to find manuals and tutorial videos.
2
2
2
3
4
7
10
12
15
17
18
18
18
19
20

Advertisement

Table of Contents
loading

Related Manuals for tagarno ZAP STAND

Summary of Contents for tagarno ZAP STAND

  • Page 1: Table Of Contents

    VERSION: 1.0 | FIRMWARE 5.8 | 2023-01-01 CONTENTS INTENDED USE WARNINGS LASER POINTER WARNING YOU HAVE RECEIVED ASSEMBLING - ZAP STAND OR ZAP STAND UPGRADE KIT ASSEMBLING - ZAP WITH Ø76 ADAPTER KIT CONNECTING OPERATION TECHNICAL SPECIFICATIONS PC REQUIREMENTS MAINTENANCE...

  • Page 2: Intended Use

    Do not dismantle any parts of the microscope, except where noted in the manual Never disassemble or clean internal optical surfaces 10. Use only the power supply provided from TAGARNO 11. Always turn off the system before unplugging, when possible 3.

  • Page 3: You Have Received

    4. YOU HAVE RECEIVED • ZAP STAND / ZAP STAND UPGRADE KIT Smart guide Camera head with lens, Base Camera mount lens ring and cables Camera adapter ring Extension block and Power supply Various screws, hex keys and P clips cylinder •...

  • Page 4: Assembling - Zap Stand Or Zap Stand Upgrade Kit

    5. ASSEMBLING - ZAP STAND OR ZAP STAND UPGRADE KIT ASSEMBLING | ZAP STAND OR ZAP STAND UPGRADE KIT (1/3) If you have a ZAP camera head already mounted on a flexarm, Attach the camera mount to the rod with the three M4x12 screws start by disassembling it by following the ZAP FLEX and ZAP (bag 1).
  • Page 5 ASSEMBLING | ZAP STAND OR ZAP STAND UPGRADE KIT (2/3) Place the extended camera arm with mounted camera in the Secure the cable bundle with the two P clips (bag 3). If you’re using camera mount and tighten the front and side finger screws (bag a US model, make sure to unmount lens protection cap when using this microscope.
  • Page 6 ASSEMBLING | ZAP STAND OR ZAP STAND UPGRADE KIT (3/3) Place the camera in the camera mount before tightening the front Secure the cable bundle with the two P clips (bag 3). If you’re using finger screw (bag 3). a US model, make sure to unmount lens protection cap when using...

  • Page 7: Assembling - Zap With Ø76 Adapter Kit

    6. ASSEMBLING - ZAP WITH Ø76 ADAPTER KIT ASSEMBLING | ZAP WITH Ø76 ADAPTER KIT (1/3) Start by removing the microscope head form your current setup, using the manufacturer’s manual. OPTION 1: WITH EXTENDED CAMERA ARM Then, mount the extension block on the camera head by using the Mount the extension cylinder to the extension block with the two four M4x60 screws (bag 1).
  • Page 8 ASSEMBLING | ZAP WITH Ø76 ADAPTER KIT (2/3) Place the extended camera arm with mounted camera in the IMPORTANT! Laser beam attenuator. Unmount lens protection cap camera mount and tighten the front and side finger screws (bag when using this microscope. OPTION 2: CAMERA DIRECTLY IN HOLDER Unscrew the lens with your hands and remove the lens ring by Screw the camera adapter ring on the camera with the three...
  • Page 9 ASSEMBLING | ZAP WITH Ø76 ADAPTER KIT (3/3) Place the extended camera arm with mounted camera in the IMPORTANT! Laser beam attenuator. Unmount lens protection cap camera mount and tighten the front and side finger screws (bag when using this microscope.

  • Page 10: Connecting

    Power supply DC Jack Power socket 3000mm Input: 12V 0.5A (DC) Use only the power supply provided by TAGARNO: Brand/Model: Mean Well/GEM18I12 Protection class II Input: 100-240V 0.45-0.2A, 50/60Hz Overvoltage category ll Output: 12V 1.5A Max Ring Terminal...
  • Page 11 CONNECTING (2/2) Connect USB 3.0 cable from the microscope to a PC. Connect the microscope to the XKEY Control box. Note: If you’re using the foot switch, connect the cable to the foot switch and then connect the footswitch and control box. Connect grounding cable to grounding point, to ensure ESD of the Connect the power supply cable to the power supply battery and microscope.

  • Page 12: Operation

    CAMERA HEAD XKEY CONTROL BOX Control buttons for TAGARNO functions. XKEY Control box for TAGARNO functions. Do only connect equipment distributed by TAGARNO. Do only connect equipment distributed by TAGARNO. Short push switches between Iris, Gain and Preset mode. Turn off/on Increase Iris/Gain or switch between zoom preset 1, 2 or 3.
  • Page 13 OPERATION (2/3) FOOT SWITCH Foot switch for TAGARNO functions. When in magnification mode: Zoom in Zoom out Change mode: Push both plus and minus to change from auto focus to manual focus. You can now adjust the focus manually by...
  • Page 14 Continue by pressing the down arrow. 1. Open the OSD menu To open the TAGARNO On Screen Display Menu, press and hold the 8. Flip picture center button for approximately 5 seconds.

  • Page 15: Technical Specifications

    9. TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS (1/2) ZAP STAND and ZAP STAND Upgrade kit ZAP STAND and ZAP STAND Upgrade kit with with Extended camera arm camera directly in mount WITH EXTENDED CAMERA ARM WITH CAMERA DIRECTLY IN MOUNT Dimensions (HxWxD)
  • Page 16 * Magnetic lens rings are only compatible with ZAP when the camera is mounted with the extension kit. ** TAGARNO Ringlights can’t be mounted on ZAP on lens +3, +4 and +5 when the camera is placed directly in the camera mount...

  • Page 17: Pc Requirements

    10. PC REQUIREMENTS FULL HD 1080P @ 59,94/50HZ Desktop Laptop Windows 7, 8 or 10 (with DirectX 11) Memory Intel® Core™ i5 or i7 @2.4GHz, CPU: Intel® Core™ i5 or i7 (4th generation named 4xxx @2.4GHz (4th generation or newer) named 4xxx or newer) Hard Disc Space 1GB required (SSD type recommended)

  • Page 18: Maintenance

    Please do not lift the microscope by grabbing the camera arm. All TAGARNO products are marked with a product label. Products sold in the US also have a FDA approval label (right): Values marked with X varies from product to product and are replaced by specific numbers and letters.

  • Page 19: Declaration Of Conformity

    COUNTRY Denmark PHONE +45 76251111 DESCRIPTION TAGARNO A/S hereby declares that the product listed above, consisting of a camera unit and a 12V power supply, is in compliance with the following European directives: 2006/25/EU Artificial Optical Radiation 2014/30/EU Electromagnetic Compatibility...

  • Page 20: Compliance Statements

    15. COMPLIANCE STATEMENTS INDUSTRY CANADA COMPLIANCE STATEMENT CAN ICES-3 (B)/NMB-3(B) This Class B digital apparatus meets the requirements of the Canadian Interference- Causing Equipment Regulations. Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le Matériel Brouilleur du Canada. FCC COMPLIANCE STATEMENT (UNITED STATES) Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital...

Table of Contents