Chapter 1: Overview; Table 1-1: Model Numbers And Ordering Options - Aerotech AMG Series Hardware Manual

Hardware Manual

Chapter 1: Overview

Table 1-1: Model Numbers and Ordering Options
AMG Series Direct-Drive Gimbals
AMG200
AMG300
AMG400
AMG500
AMG600
Feedback (Required)
-E1
-E2
-E3
Metrology (Required)
-PL1 Metrology, uncalibrated with performance plots
-PL2 Metrology, calibrated (HALAR) with performance plots
Integration (Required)
Test as system: Testing, integration, and documentation of a group of components
-TAS
as a complete system that will be used together.
Test as components: Testing and integration of individual items as discrete
-TAC
components that ship together.
www.aerotech.com
200 mm nominal aperture
300 mm nominal aperture
400 mm nominal aperture
500 mm nominal aperture
600 mm nominal aperture
Incremental encoder, 1 Vpp
Incremental encoder, TTL, x5 interpolation
Incremental encoder, TTL, x50 interpolation
AMG
17